clear

selected

room

unit

Pieces

1. Vibrating screen is blocked

Stop

3. Low crop moisture content and high roller gear position;

4. The speed of the cleaning fan is not enough and the belt is slipping;

5. Blocking of the thrower affects the low speed of the cleaning fan;

6. The vibrating screen is blocked by debris;

7. The grass cutter is blocked;

8. The drive shaft bearing is damaged.

3. Lower the gear of the roller gearbox;

4. Tighten the V-belt of cleaning fan;

5. Clean up items blocked by the ejector;

6. Clean up debris;

7. Clean up the chopper debris;

8. Replace with new bearings.

2. Fruit box peanuts

Fruit impurity rate

high

1. Low crop moisture content and high roller gear;

2. The speed of the cleaning fan is not enough, and the belt is slipping;

3. The thrower is blocked, which affects the low speed of the cleaning fan;

4. The grass cutter is blocked;

5. The sieve is deformed by foreign matter.

1. Lower the gear of the roller gearbox;

2. Tighten the V-belt of cleaning fan;

3. Clean up the thrower items;

4. Clean up the chopper debris;

5. Perform repairs.

3. Miscellaneous stirring dragon

Blockage

1. Low crop moisture content and high roller gear;

2. The sieve is deformed by foreign matter;

3. The speed of the cleaning fan is not enough, and the belt is slipping;

4. There is rain on crops;

5. The auger shaft bearing is damaged.

1. Lower the gear of the roller gearbox;

2. Repair;

3. Tighten the V-belt of cleaning fan;

4. Stop operation and continue drying;

5. Replace with new bearings.

Miscellaneous promotion

Clogged

1. Lift the conveyor belt to slip;

2. There are too many sundries in the surplus stirring dragon;

3. The conveyor belt runs off and rubs the side wall;

4. Miscellaneous auger shaft to drum gearbox V-belt slips;

5. The driving shaft or the driven shaft bearing is damaged.

1. Adjust the left and right adjustment rods on the upper part of the lifter to tighten the conveyor belt;

2. Check the tension of the triangle belt of the cleaning fan;

3. Adjust the tension consistency of the conveyor tension roller;

4. Adjust the V-belt tensioning wheel to increase the tension;

5. Replace with new bearings.

Thrower flower

Fruit jam

1. The fruit is not unloaded in time after the box is full;

2. Suddenly stop running during operation;

3. The ejector is not completely cleaned after being blocked;

4. The observation port cover of the ejector is not closed;

5. The inlet of the throwing fan is blocked by debris;

6. Cleaning the V-belt of the fan to slip;

7. The bearing of the fruit mixing dragon is damaged.

1. Monitor and unload fruits in time;

2. It is required to stop the forward operation, and it must be operated at rated speed for 12 minutes before reducing the throttle;

3. It must be cleaned up thoroughly before it can be restarted;

4. Repair and tighten the bolts firmly;

5. Clean up debris;

6. Adjust the V-belt tensioning wheel and tighten the V-belt;

7. Replace with new bearings.